Laporan APJK Kelompok 1

Rancangan Horizontal Cabling 1 Lantai

Keterangan :

Router                     Switch                      Patch Panel        End-User (PC)

                                Kabel UTP = Max 90 M

                                Kabel UTP Patch Cords = Max 5 M

Alat Yang Dibutuhkan :

1.       MikroTIK Router RB1200 1U Rackmount

2.       TP – Link Switch TL-SL5428E

3.       Patch Panel

4.       Kabel UTP ver 6 Tipe 568-B

·      Kabel UTP Patch Cords = Max 5 M

·      Kabel UTP = Max 90 M

5.       Modular Jack Tipe 568-A

Rancangan dalam Packet Tracer

 

Configurasi Switch 0

Switch>ena

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Membuat Virtual LAN

Switch(config)#interface fa0/1

Switch(config-if)#switchport mode trunk

Switch(config-if)#exit

Switch(config)#interface fa0/2

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 1

Switch(config-if)#exit

Switch(config)#interface fa0/3

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 2

% Access VLAN does not exist. Creating vlan 2

Switch(config-if)#interface FastEthernet0/4

Switch(config-if)#switchport access vlan 3

% Access VLAN does not exist. Creating vlan 3

Switch(config-if)#interface FastEthernet0/5

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 4

% Access VLAN does not exist. Creating vlan 4

Switch(config-if)#interface FastEthernet0/6

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 5

% Access VLAN does not exist. Creating vlan 5

Switch(config-if)#interface FastEthernet0/7

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 6

% Access VLAN does not exist. Creating vlan 6

Switch(config-if)#interface FastEthernet0/8

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 7

% Access VLAN does not exist. Creating vlan 7

Switch(config-if)#interface FastEthernet0/9

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 8

% Access VLAN does not exist. Creating vlan 8

Switch(config-if)#exit

Configurasi Router 0

Router>ena

Router#

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Membuat IP DHCP untuk Client Virtual LAN

Router(config)#ip dhcp pool vlan1

Router(dhcp-config)#default-router 192.168.4.1

Router(dhcp-config)#network 192.168.4.0 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan2

Router(dhcp-config)#default-router 192.168.4.33

Router(dhcp-config)#network 192.168.4.32 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan3

Router(dhcp-config)#default-router 192.168.4.65

Router(dhcp-config)#network 192.168.4.64 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan4

Router(dhcp-config)#default-router 192.168.4.97

Router(dhcp-config)#network 192.168.4.96 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan5

Router(dhcp-config)#default-router 192.168.4.129

Router(dhcp-config)#network 192.168.4.128 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan6

Router(dhcp-config)#default-router 192.168.4.161

Router(dhcp-config)#network 192.168.4.160 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan7

Router(dhcp-config)#default-router 192.168.4.193

Router(dhcp-config)#network 192.168.4.192 255.255.255.224

Router(dhcp-config)#exit

Router(config)#ip dhcp pool vlan8

Router(dhcp-config)#default-router 192.168.4.225

Router(dhcp-config)#network 192.168.4.224 255.255.255.224

Router(dhcp-config)#exit

Setting Sub-Interface pada Router

Router(config)#interface fa0/0.1

%LINK-5-CHANGED: Interface FastEthernet0/0.1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.1, changed state to up

Router(config-subif)#encapsulation dot1Q 1

Router(config-subif)#ip address 192.168.4.1 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.2

%LINK-5-CHANGED: Interface FastEthernet0/0.2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.2, changed state to up

Router(config-subif)#encapsulation dot1Q 2

Router(config-subif)#ip address 192.168.4.33 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.3

%LINK-5-CHANGED: Interface FastEthernet0/0.3, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.3, changed state to up

Router(config-subif)#encapsulation dot1Q 3

Router(config-subif)#ip address 192.168.4.65 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.4

%LINK-5-CHANGED: Interface FastEthernet0/0.4, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.4, changed state to up

Router(config-subif)#encapsulation dot1Q 4

Router(config-subif)#ip address 192.168.4.97 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.5

%LINK-5-CHANGED: Interface FastEthernet0/0.5, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.5, changed state to up

Router(config-subif)#encapsulation dot1Q 5

Router(config-subif)#ip address 192.168.4.129 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.6

%LINK-5-CHANGED: Interface FastEthernet0/0.6, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.6, changed state to up

Router(config-subif)#encapsulation dot1Q 6

Router(config-subif)#ip address 192.168.4.161 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.7

%LINK-5-CHANGED: Interface FastEthernet0/0.7, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.7, changed state to up

Router(config-subif)#encapsulation dot1Q 7

Router(config-subif)#ip address 192.168.4.193 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#interface fa0/0.8

%LINK-5-CHANGED: Interface FastEthernet0/0.8, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.8, changed state to up

Router(config-subif)#encapsulation dot1Q 8

Router(config-subif)#ip address 192.168.4.225 255.255.255.224

Router(config-subif)#no shut

Router(config-subif)#exit

Router(config)#